When you have a cd player, after some time, it can break down. One of the most common problems which a cd player might display there is no disc.
Are you are suffering from such a problem?
If so, it is time to understand how to fix this problem.
Fortunately, there are a few ways to do so. I will highlight the way below.
How to fix a cd player that says no disc?
I will share a step-by-step procedure to fix a cd player that says no disc.
The 1st thing you need to do is insert a CD with a common video file format. Many times, when playing a cd which you have burned on your own, it might not recognize the CD. You have to use a cd with a file format like .AVI. In most cases, this single step will help you solve the problem.
Otherwise, you can follow the steps below.
If step 1 does not work out, you have to take a cotton ball and apply rubbing alcohol.
You have to shape the cotton so that it can reach the laser eye or the lens of the CD player. Once it reaches that surface, you have to wipe it clean in a smooth fashion.
Once you wipe dry the laser eye clean, now you have to use dry cotton. Gently remove the residue of the alcohol using dry cotton. If the residue is left over, you will experience the same problem again. That is why it is necessary to remove this residue.
In case the above step also does not work out, you have to use a lens cleaning kit. You have to take the lens cleaning disc and put it into the CD player.
After that, click the play button. Such a cd consists of a track that does not consist of any audio and video. You have to let it run for the duration of the CD. Once the track finishes, you can remove it.
The CD consists of small brushes which overlap the lens. These brushes can easily clean the lens.
Once you remove the CD, the problem will be resolved. You will no longer and counter any disc error message in the CD player.
With these six steps, it will become easy to fix a cd player that says no disc. Apart from this, there are some other tips to follow as well. I will highlight these tips below.
Additional tips to fix a cd player that says no disc:
When you follow the tips which I will highlight below, the effectiveness of 6 steps will increase significantly. Consequently, it becomes easier for you to eliminate this no disc error.
1. Check the disc:
Before you put the lens cleaning disc or the disc in the common video file format, it is important to check the disk for scratches and cracks. It should be devoid of both. In case it consists of scratches, it can further spoil the lens. That will aggravate the problem rather than solving it. That is why it is important to check the disc before putting it in the CD player.
2. Check the manual:
Often, the CD player displays no disc because it does not support that file format. How will you know which file format it supports and which one does not?
The manual is the best way to do so. Even if you have a physical manual, you can take the digital manual online.
Once you do so, it will become easier to understand which format is supported and which one isn’t.
After that, you can put the disc with the supported file format, and it will eliminate the error.
3. Try different media:
In case, video CD is not being detected; you can opt for playing an audio CD. It will let you know whether there is a problem with the format or with the disc. Accordingly, you can fix the problem.
4. Clean the disc:
In case you want to play a specific disc, you have to work on cleaning the disc rather than cleaning the CD player.
You can clean the disc with a mild detergent and water. However, do make sure that you are using a lint-free cloth to dry it after cleaning the disc.
Cleaning the disc is not a foolproof procedure. There are chances that you might end up damaging the disc as well. Only when you’re willing to take that risk should you go ahead and fix the CD using this tip.
5. Unplug the CD player:
One of the obvious ways to fix the CD player is to unplug it. You have to let it sit for 1 minute.
After that, you have to connect it once again. In case it is a temporary error or issue, this simple tip will fix the problem. In that case, you will not have to worry about testing different CDs.
6. Try burning a completely new disc:
One of the best ways to detect the problem is to burn a completely new disc with audio or video file.
When you burn a new disc, you can be sure that it is devoid of any scratches. Not only that, the file will be proper as well.
In that case, you know that there is no problem with the disc.
If the CD player plays that disc and does not show a no disc error, it means that the problem is with the disc that you are trying to play.
In that case, you can focus on the disc rather than the CD player.
This simple tip will help you diagnose the problem in a much better way.
With these 6 tips, fixing this error will certainly become easier for you.
With my guide above, it will become easier to fix a cd player that says no disc. In fact, it will also help you understand whether the problem is with the CD player or the CD itself. My guide above will help you in more ways than one.
If you want to go ahead with a new CD player, you can read my post on portable cd player for car with aux, portable cd player for car with USB connection, portable cd player with car adapter in my post 1, post 2, post 3 respectively.