Many times, you need to figure out an alternative way to put your car in neutral without using the key. That is because your car keys might be stolen or they might be misplaced.
While there are ways to put your car in neutral without a key, but not many people know about it. Most towing operators, as well as mechanics, are aware of this technique. I will today highlight the same for you.
With this technique, which I will highlight below, it will become easy for you to put the car in neutral without a key in the ignition.
How to put the car in neutral without key in the ignition?
I will highlight this step-by-step to do so below.
Step 1: Place the blocks:
The very 1st thing you need to take care of the safety. You have to place the wheel blocks in front and behind all the tires. The aim is to ensure that the car does not move accidentally.
It might so happen that when you put the car in neutral, it might roll a bit. If it rolls uncontrollably, someone might get hurt. To avoid this, you have to place the blocks so that the wheels will not move. Placing the blocks before and after the wheels will keep them in place.
Step 2: Use a flashlight:
To execute this method, you will have to go underneath the car. Due to the same, you have to 1st turn on a flashlight. Only once you do so you can crawl underneath the vehicle.
The aim here is to look at the transmission system of the vehicle. Only once you can locate it can you progress to the next step.
Step 3: Look at the right cable:
There is a cable that runs alongside the transmission system. You have to look at this cable. The way to locate this cable is to spot the liver and the switch attached to it.
You have to try and disconnect the cable. Only once you disconnect the line can you move to the next step. You have to push back the lever as well. Only once it makes the clicking noise twice, you have to stop pushing it.
The direction of the push should be towards the rear of the vehicle. You have to listen attentively for the clicking noise twice.
Step 4: Check the status of the car:
Now the car should be in neutral. However, it is vital to check the status of the car before assuming the same.
The best way to do so is to push the car slightly. Before you push the car, you have to make sure that the wheel blocks are still in place.
If the car is in neutral, it should move slightly. Once you confirm the same, you have to decide whether the wheel blocks should stay in place or remove them and push the car to an alternate location. It all depends on the reason for which you are putting the car in neutral.
This is the easiest way to put a car in neutral without keys in the ignition.
There are, however, a few safety tips which you have to follow.
I will highlight the safety tips below.
Safety precautions to follow while putting the car in neutral without gain the ignition:
The safety precautions which you should follow include:
1. Use proper wheel blocks:
Wheel blocks have a weight rating. It refers to the gross vehicle weight. When you’re placing the wheel blocks to keep the car stationary, you have to consider the type of car you have. Once you consider the kind of car, you have like a sedan, hatchback, SUV, finding compatible blocks is easy.
After you find compatible wheel blocks, you have to place them securely. You have to put them in such a way that you can arrest the forward and backward momentum of the car. To do so, you will require to choose the right wheel blocks.
Only when they are firmly in place can you think about putting the car in neutral.
2. Be careful underneath the vehicle:
When you’re moving underneath the vehicle, no part of your body should come in line with the wheel’s direction. That is because if accidentally the car starts rolling, you should not be in its way.
Not only that, you have to ensure that your body parts are not in direct contact with the underneath body of the car. It will ensure that you do not come in contact with any part of the car which is hot.
While getting underneath the car, it is good to wear a safety dress, and gloves like mechanics usually do.
3. Get additional help if you’re not confident:
It is better to get some additional help. You can call a friend or a relative to help you out. You can put the car in neutral yourself, but it is always a good idea to have an experienced person around. When that is the case, accidents will not occur.
4. Hire a professional if you have no prior experience with cars:
If you haven’t handled any such car work before, it is a good idea to hire a professional. Consequently, you can outsource the solution to this problem. You will not have to worry about dealing with it yourself.
5. Make sure someone is in the driver’s seat when you’re pushing the car:
The safety precaution I highlight now refers to when you’re pushing the car around. Rather than merely pushing the car around, you have to ensure that someone is in the driving seat. The person in the driving seat will be able to control the car’s direction and apply the car’s brakes if need be. It is an obvious precaution, but when people are under stress of putting the car in neutral and moving it, they often forget the most obvious precautions. That is why I’m mentioning it.
If you follow these safety precautions while putting the car in neutral without a key in the ignition, you can do so without any accidents or other problems.
So, yes, you can put a car in neutral without a key in the ignition. With my guide above, you can certainly do so. It is now time to execute the same after taking appropriate safety precautions, which I have highlighted.
If you need help keeping your keys safe, buy a magnetic key holder for the car. My post here will help you buy the best magnetic key holder for a car.